Boster New Design SC/APC Field Assembly Optical Connector in The Field

Based on the phrasing "Boster New Design SC/APC Field Assembly Optical Connector," you are likely looking at a product designed to terminate a fiber cable in the field without a fusion splicer.

Here is a general breakdown of what this type of connector typically offers:

Purpose: Unlike pre-connectorized cables (like the OptiTap), this connector is designed to be installed directly onto a fiber cable by a technician on-site, usually to repair a broken cable or pull through tight conduits.

SC/APC Interface: This indicates a square connector (Subscriber Connector) with an Angled Physical Contact (the green housing). The angle reduces signal reflection, which is critical for video/FTTH signals.

"New Design" Features: Modern field assembly connectors usually feature mechanical splicing internally. Instead of glue or epoxy, they use a small cam mechanism and index matching gel to hold the fiber in place. The "new design" likely refers to a tool-less assembly, a clearer visual indicator for pass/fail installation, or a more rugged housing to survive weather exposure.

Performance: A high-quality field assembly connector generally achieves Insertion Loss ≤ 0.3dB and Return Loss ≥ 65dB. However, mechanical field connectors usually have slightly higher long-term signal loss than factory-terminated or fusion-spliced connectors.

Note: The availability and specific technical data sheet for Boster's current "New Design" model are often best verified through official distribution channels or direct inquiry with the manufacturer, as part numbers can change frequently.